Despite their high performance, Alocit coatings are easy to use, hard-wearing and environmentally safe. They have no volatile organic compounds (VOCs) or heavy metals and are as effective and safe to use underwater as they are on dry land.

Where can you apply it?
Almost anywhere: floors, walls, bunds, tanks, bilges, tunnels, marine structures, sheet & round piles, under-decking, lock gates, bridges and water treatment plants. Resists hydrostatic pressure and bonds to fresh concrete and on pre-formed components. Encapsulating PCBs and other contaminants.

Coatings of many colours
Black, white and grey as standard. Any others on request – a minimum quantity may apply. Colour matching to international standards: US FED-STD-595, RAL, BS 36, BS 3800

A wide range of suitable substrates
Outstanding adhesion when applied on damp or oily metal and concrete. On dry or wet surfaces, splash zones, underwater, on sweating pipes and areas of constant condensation.

Outstanding properties
Excellent adhesion, abrasion and corrosion protection on steel. Sealant and adhesive for concrete substrates.

Great resistance
Water/salt water, sewage, petrol/gasoline, oil, certain acids, sodium and potassium hydroxide solutions etc.

Simple equipment required
Alocit can be applied by brush, roller or spray. Plural component or airless pumps can be used for spraying or power-brushing. Coatings may be applied by brush straight from the container underwater.

All material Copyright © A&E Systems 2009 . Registered users can also use the ‘Tech Site’ link to access more detailed information. Registration is available only to A&E Group personnel and its Associate Companies, for registration information contact your local office.    

Above: NZ navy divers apply Alocit to a damaged prop shaft

Left to right: oily concrete in damp Swiss rail tunnel, an application on streaming wet bolts in the tropics, spraying Alocit in freezing UK winter and a diver applying Alocit straight from the can in the splash zone